Altitude Test Chamber（Altitude (Pressure) Test Chamber）, also named Pressure Test Chamber, is one must-have test machine to anti-pressure performance of articles. This test machine simulates the low pressure of high altitude.

constant temperature immersion water test Chambers （Immersion Water Test Chamber）is necessary test equipment for automotive,aerospace,automotive,pharmaceutical,car industry etc, It is designed to detect the soaking performance of the paint film coating,The principle is that when the sample plate is soaked in deionized water at 40 ℃ for a while ,Check the foam density of the board and determine the adhesion of the film according to the test method of D251075.

Walk-in Rain Test Chamber（Drive in custom size IP rain spray water resistant test chamber） is suitable for detecting the waterproof sealing of the outdoor automotive. Through the waterproofing test room, it can simulate the rainy environment in the natural state of the outside and detect the water sealing state of the motorized train, which is helpful for customer product to make progress

Three Zones high and low temperature test chamber （Three-Chamber Temperature and Humidity Alternating Test Chamber）is the must-have test equipment for aviation, Aerospace, metal, plastic, rubber, electronic industry etc.It is applied in testing the degree of endurance of material structure under dramatically temperature changing.Hence it is able to test chemical change or physical damage caused by heat expansion and cold contraction on test specimens in the shortest time duration

Lift-type Rain Test Chamber （Lift-type Drip Test Machine）meets MIL-STD-810G Method 506.5 Procedure III, which is to test waterproof ability of test item. It uses a test setup that provides a volume of water greater than 280L/m2/h dripping from a dispenser with drip needles. The test item will be placed under the water drip tank to bear dripping water droplets. The height of this test machine is adjustable, max height is 4000 mm.

Rain Test Chamber（Jet Water Test Chamber）, also named Water Resistance Test Chamber, is applied to test the watertightness of enclosures of automotive parts, outdoor lamps and electronics, etc. The test chamber has drip nozzles or spray nozzles to supply water onto test item. Test Standard IEC 60529 is mainly used for such tests. IEC 60529 defines methods IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8. With ingenious design, Lenpure make IPX1 to IPX6 functions on one machine.

Walk-in Condensation Test Chamber（Large Condensate Water Test Chamber） is a new type product of Linpin Instrument developed according to the latest DIN EN ISO6270-2, DIN 50018-97, and related test standards. The equipment can run 100%RH humidity test and realize low temperature, high temperature, and humidity tests at the same time, It is a must-have equipment for quality inspection institution and school, electric and electronics, and motor and automotive industries.

Walk-in high and low temperature humidity test chamber （Walk-in Temperature and Humidity Test Chamber）give the maximum durability and performance for your most demanding test requirements.It is necessary test equipment for aviation, Aerospace, automotive, electronics, military and solar panel industry etc.It can be used to test and determine the parameters and performance of electrical, electronic products and materials in the most extreme temperature and humidity conditions.

Walk-in Temeprature Chamber（Walk-in test Chamber） can simulate high and low temeprature environment to certify the performance of test items. Its size is large to contain big test items, such as vehicles. This test chamber is designed for testing airbag systems. The airbags will be fired/activated at right temperature and be shoot by a high-speed camera.

Walk-in temperature humidity Photovoltaic module test Chambers（Walk-In Temperature (& Humidity) Chamber） is mainly used for the photovoltaic industry, the ground with crystalline silicon photovoltaic modules, the ground with a series of thin film PV modules and other photovoltaic components for high temperature, low temperature, alternating wet heat or constant temperature and environmental changes in the parameters and performance; Or constant hot and humid test temperature and environmental changes in the parameters and performance