Composite salt spray test chamber|Multi-Function Salt Spray Chamber-Beijing Yashilin Testing Equipment Co., Ltd

Product Features

The test chamber can adopt a split-type structure, with the refrigeration unit and the chamber body placed separately；
An opening is provided at the top of the chamber to facilitate the hoisting and installation of the motor；
Four support holes are provided at the bottom of the chamber. A custom-designed soft silicone plug is used to seal the support frame, preventing frosting during low-temperature operations and the overflow of water from inside the chamber；
The central shaft is equipped with a special sealing device to prevent frosting during low-temperature operations；

Product Parameter

Model	Studio Size (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500
LRHS-412-RFHY	750×1100×500
LRHS-663-RFHY	850×1300×600
LRHS-816-RFHY	850×1600×600
LRHS-1080-RFHY	900×2000×600
temperature range	RT～65℃/-30℃～80℃
Humidity range	30%～98% RH
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃
Temperature fluctuation	±0.5℃
Salt spray deposition	1～2ml/80 cm².h(16-hour average)
heating rate	0.5℃～1.5℃/min
cooling rate	0.5℃～1.0℃/min
Compressed air pressure	2.00±0.01（kg/cm²）
Spraying method	Continuous/periodic selectable
Specimen holder angle	20±5°
Test Methods	NSS test AASS test CASS test
Case Material	PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material	PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums	Imported high-grade stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tubing
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling	Single or double cascade refrigeration
Compressor	Taikang, France
temperature sensor	PT100 platinum resistance temperature measurement body
heater	Titanium Heating Tube
interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration	V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection	Machine under phase/reverse phase, equipment timing, rapid fogging indication, test end Over-temperature, low water level protection, leakage, short-circuit, overpressure overload compressor
Supply Voltage	AC380V±10% 50Hz
Power	8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment	5℃～＋28℃ ≤85% RH
Note: 1、the test data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard composite salt spray test chamber etc 3、This technical information, subject to change without notice!

Solution

Semiconductor Solutions

Beijing Asterix can provide the semiconductor industry with test solutions that cover all types of temperature and humidity reliability in the chip sealing and testing process.

Photovoltaic Energy Storage Solutions

Beijing Ashline can provide testing solutions for PV energy storage industry including PV cells, PV modules, PV inverters, energy storage cells, energy storage PCS, energy storage battery clusters, energy storage cabinets and other related industry products.

Consumer Electronics Solutions

Beijing Asterix can provide the consumer electronics industry with test solutions for electronic components, assemblies, and finished products, such as mobile phones, tablets, computers, wearable devices and other related industry products.

New Energy Vehicle Solutions

Covering the temperature and humidity testing of new energy vehicles and three electric systems, the products cover walk-in high and low temperature hot and humid chambers for vehicles, high and low temperature test chambers for battery cells, and explosion-proof chambers for airbags.