Photovoltaic Dustproof Test Chamber|Photovoltaic Dust Test Chamber-Beijing Yashilin Testing Equipment Co., Ltd

Product Features

Split structure, freezer unit and box can be placed separately.
Hole in the top of the box for easy lifting of the motor.
Soft silicone plug seal to avoid frosting when doing low temperature.
The central shaft adopts a special sealing device to avoid frost when doing low temperature.

Product Parameter

Studio Size (DWH)mm	1400×2400×900（DWH）mm
Dimension（DWH）mm	6000×9650×3700（DWH）mm
temperature range	23℃～70℃
temperature deviation	≤±2℃
Humidity range	＜30%RH
Dust blowing air speed	1.5～10 m/s
Sand blowing wind speed	18.0～30.0 m/s
Blowing Dust Concentration	3.0～17.6 g/m³ (10.7 ± 7 g/m³)
sandblast concentration	0.18 + 0.2 g/m³；1.1 ± 0.3 g/m³；2.2 ± 0.5 g/m³
Test dust	quartz dust
Sand Size	≤ 149 μm to pass through a 150 μm diameter mesh.
viewing window	800×500mm(Effective vision)
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Temperature Controller	Imported “UEC” brand temperature and humidity meter
Temperature:	5℃～＋35℃(Average temperature over 24 hours ≤ 28°C)
Relative Humidity:	≤85%RH
Barometric pressure:	86kPa～106kPa
Supply Voltage		AC380V±10% 60Hz
Power		Approx. 45.0kW
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard photovoltaic dustproof test chamber etc 3、This technical information, if there is any change without prior notice

Solution

Semiconductor Solutions

Beijing Asterix can provide the semiconductor industry with test solutions that cover all types of temperature and humidity reliability in the chip sealing and testing process.

Photovoltaic Energy Storage Solutions

Beijing Ashline can provide testing solutions for PV energy storage industry including PV cells, PV modules, PV inverters, energy storage cells, energy storage PCS, energy storage battery clusters, energy storage cabinets and other related industry products.

Consumer Electronics Solutions

Beijing Asterix can provide the consumer electronics industry with test solutions for electronic components, assemblies, and finished products, such as mobile phones, tablets, computers, wearable devices and other related industry products.

New Energy Vehicle Solutions

Covering the temperature and humidity testing of new energy vehicles and three electric systems, the products cover walk-in high and low temperature hot and humid chambers for vehicles, high and low temperature test chambers for battery cells, and explosion-proof chambers for airbags.