| Sizes of Walk-in Temperature and Humidity Test Chamber |
|
Model
|
Volume (m³)
|
Temperature Range
(°C)
|
Internal Dimension (mm) D*W*H
|
External Dimension (mm) D*W*H
|
|
LRHS-8MB-LJS
|
8
|
A: -20～100°C
B: -40～100°C
C: -60～100°C
D: -70～100°C
E: or customized
|
2000*2000*2000
|
As per design drawing
|
|
LRHS-15MB-LJS
|
15
|
2500*3000*2000
|
|
LRHS-30MB-LJS
|
30
|
3000*5000*2000
|
|
LRHS-60MB-LJS
|
60
|
5000*6000*2000
|
Note: In the Model, the number means volume of test chamber's working room, and ABCD means the temperature range.
For example, model LRHS-8MB-LJS means the volume of this test chamber is 8000L(8m³), and its temperature range is -40°C~+100°C. LRHS-15MC-LJS means the volume is 15000L(8m³) and the temeprature range is -60°C~+100°C |
| Basic Specification |
|
Performance
|
Temperature Range |
A: -20～100°C, B: -40～100°C, C: -60～100°C, D: -70～100°C, E : or customized |
| Temperature Fluctuation |
±0.5°C（No-load） |
| Temperature Uniformity |
≤2℃（No-load） |
| Ramp Rate |
- 40℃～100℃≤90min for heating (non-linear, based on on-load)
100℃～-40℃≤90min for cooling (non-linear, based on on-load)
Note: can be customized as per requirement |
|
Material
|
External Casing |
Cold-rolled A3 (Q235) steel plates with plastics painted. |
| Interior Working Room |
Stainless Steel Plates SUS304 with miror surface |
| Heat Isolation |
Polyurethane foams and fine glass fibres |
| Illumination Lamp |
Philips® one in per standard test chamber. |
| Viewing Window |
Multi-layer hollow toughened glass with conductive films for heating to defrost |
|
Heating & Cooling System
|
Heater |
Steipped Nickel-chromium Wire Heater |
| Air Blower |
Anti-temperature stainless fan blades with low noise |
| Compressor |
Hermetically-sealed Techmesh® or semi-sealed Bitzer® or GEA® or equivalent compressors |
| Cooling Method |
Single or dual cooling (Air-cooled or Water-cooled) |
| Refrigerant |
R404A or/and R23 (eco-friendly) |
|
Control System
|
Controller |
7" Programmable colorful touch-screen display
LCD English Display
Microcomputer integrated controller |
| Functions |
Data Record (Max 600 days x 24hrs), History Curve, USB data download & upload, Remote controlling through PC, Automatic protection alarms, etc. |
| Temperature Sensor |
Platinum Resistance.PT100Ω |
| I/O Interface |
Communicate port (RS485) to connect test chamber to a PC |
| Standard Configuration |
Test Chamber x 1,Wet Bulb Gauzex 1, φ100mm Cable Access Port x 1 with 1 soft plug, EMO x 1, Tri-color Indicator x 1, etc. |
| Safety Protection |
Power leakage protection/Compressor over-heat, over-load or over-current protection/Dry burning protection. |
| Voltage |
380V/440V±10%, 50Hz/60Hz or as per requirement |
| Ambient Enviromental for application |
5°C～+30°C ≤ 85%R.H |
| Test Standards (not limited to) |
|
High And Low Temperature Test Chamber Salt Spray Test Chamber Aging Test Series Walk in Testchamber Temperature Test Chamber Thermal Shock Test Chambers Programmable Temperature Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Corrosion Test Chamber Thermal Cycling Chamber temperature humidity test chamber High and Low Temperature Humidity Test Chamber Low temperature test chamber High Temperature Test Chamber thermal cycling chamber Rustproof Grease Humidity Test Chamber UV Aging Test Chamber Ozone Aging Test chamber Ventilation Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Test Machine Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber High and Low Temperature Battery Test Chamber PV Module UV Test Chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
