Walk-in Rapid Temperature Change Test Chamber|Large-scale Rapid Temperature Change Test Chamber

Walk-in Rapid Temperature Change Test Chamber|Large-scale Rapid Temperature Change Test Chamber

Introduction
The walk-in temperature change test chamber (Large-scale Rapid Temperature Change Test Chamber)is an essential testing device in the fields of aviation, automotive, home appliances, and scientific research. It is used to test and determine the parameters and performance of electrical, electronic, and other products and materials after exposure to high-temperature, low-temperature, or constant-temperature environments.

Phone

400-6400-998
Product Features
Product Parameter

Product Parameter

Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-2000D(R15)-LJS 1000×2000×1000 Subject to contractual three-view
LRHS-4000D(R15)-LJS 2000×2000×1000
LRHS-6000D(R15)-LJS 2000×3000×1000
LRHS-8000D(R15)-LJS 2000×2000×2000
temperature range A:-20℃~150℃      B:-40℃~150℃
C:-60℃~150℃      D:-70℃~150℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
Humidity range 20%~98% RH
Humidity uniformity +2% -3% RH
Humidity fluctuation ±2%
heating rate -55℃~125℃ Linear 15℃/min (at no load)
cooling rate 125℃~-55℃ Linear 15℃/min (at no load)
Time Setting Range 1~60000M
test hole Mounted on the left side of the machine for use with external test power or signal cables
viewing window 395 x 395mm (effective field of view)
Outer case material High quality A3 steel plate electrostatic spraying
Inner box material Imported high-grade stainless steel SUS304
Insulation material Rigid polyurethane foam + fiberglass
Temperature Controller Imported “UEC” brand temperature and humidity meter
temperature sensor PT100 platinum resistance temperature measurement body
Cooling method Two-machine cascade refrigeration
Compressor France Tycon/Germany Bitzer/Germany Copeland
standard configuration Equipped with a condensate catch pan and discharged out of the box
security protection Compressor overpressure overload, fan motor overheating, the whole machine under phase / reverse phase
Timing, over temperature, leakage protection, overload and short-circuit protection
Supply Voltage AC380V±10% 50Hz
operating environment 5℃~+28℃ ≤85% RH
Note:
1、 the model in the R represents linear, r represents non-linear, the number in parentheses represents the cooling rate
2、Test data are measured in the use of ambient temperature of 25 ℃ and well ventilated conditions
3、Above parameters are for reference only, can be customized according to user-specific test parameters
4、This technical information, subject to change without notice

 

Recommendation
Solution
Semiconductor Solutions
Beijing Asterix can provide the semiconductor industry with test solutions that cover all types of temperature and humidity reliability in the chip sealing and testing process.
MORE
Photovoltaic Energy Storage Solutions
Beijing Ashline can provide testing solutions for PV energy storage industry including PV cells, PV modules, PV inverters, energy storage cells, energy storage PCS, energy storage battery clusters, energy storage cabinets and other related industry products.
MORE
Consumer Electronics Solutions
Beijing Asterix can provide the consumer electronics industry with test solutions for electronic components, assemblies, and finished products, such as mobile phones, tablets, computers, wearable devices and other related industry products.
MORE
New Energy Vehicle Solutions
Covering the temperature and humidity testing of new energy vehicles and three electric systems, the products cover walk-in high and low temperature hot and humid chambers for vehicles, high and low temperature test chambers for battery cells, and explosion-proof chambers for airbags.
MORE

Copyright © Beijing Yashilin Test Equipment Co., LTD 备案号:京ICP备08004694号

Website Map:Sitemap