It is normal for equipment to malfunction, which may be caused by improper operation or issues with the equipment itself. Based on years of after-sales service experience in the environmental testing industry, we have summarized the following common fault causes and solutions for waterproof test equipment.
Fault Causes and Solutions
-
No Power to the Waterproof Test Equipment
- Solution: Check whether the power supply is normal, whether the phase sequence is incorrect, and whether the equipment is properly grounded.
-
Waterproof Test Equipment Fails to Start
- Solution: Check whether the water tank is low on water.
-
No Water Spray During Rain Test
- Solution: Check whether the water pressure is normal, whether the water pump is working, and whether the nozzle is clogged.
-
Turntable Does Not Rotate
- Solution: Check whether the parameters are set correctly and whether the turntable motor is functioning.
-
Swing Pipe Does Not Move
- Solution: Check whether the parameters are set correctly and whether the swing pipe motor is working properly.
Before operating the waterproof test chamber, users should fully understand the equipment and carefully read the user manual to avoid operational errors that may lead to unnecessary issues.
