NEWS CENTRE

What are the installation requirements for a xenon lamp aging test chamber?

Release time:2025-04-12
The xenon lamp aging test chamber is used to simulate the destructive light waves existing in different environments through xenon arc lamps that can simulate the full-sunlight spectrum. It is a necessary testing device in fields such as aviation, automotive, home appliances, and scientific research. This equipment can provide environmental simulation and accelerated aging tests for scientific research, product development, and quality control. It is used in schools, factories, military units, research institutions, and other entities. This type of test chamber is the most widely used accelerated aging detection equipment. Products tested with it are generally sensitive to the long-wave band of ultraviolet light, visible light, and infrared light.
The placement of the xenon lamp aging test chamber must follow the instructions in the manual to achieve better test results. First, the distance between the walls and other items should be at least 60 centimeters to maintain proper spacing. Next, it should be placed on a flat surface without vibration. The installation location should have less dust and humidity, be well-ventilated, and not be directly exposed to sunlight. The placement area must also be away from flammable, explosive, and heat-sensitive items to prevent accidents.
The simulated spectrum of the xenon lamp aging test chamber mainly includes ultraviolet light, visible light, and infrared light, among which ultraviolet light has the most destructive effect. Some customers may think of UV aging test chambers, but the principle of the xenon lamp aging test chamber is similar. It just has more methods than the UV aging test chamber.
Have you learned about the installation and usage of the xenon lamp aging test chamber mentioned above? If you still have questions about this equipment, you can search for our company's official website through the Baidu search engine.
Recommendation
The salt spray test chamber is primarily used to create an artificially simulated salt spray environment for evaluating the corrosion resistance of metals and their alloys, metal coatings, organic coatings, anodic oxide films, and conversion coatings.
In this chapter, we will discuss the correct method for placing test samples in a high/low temperature test chamber.
During the use of a salt spray test chamber, certain problems may arise that require troubleshooting and resolution. If your salt spray test chamber encounters any of the following issues, you can apply these solutions.
The HAST test chamber is a specialized device designed to accelerate the aging process of materials and products by simulating extreme environmental conditions—high temperature and high humidity.

Copyright © Beijing Yashilin Test Equipment Co., LTD 备案号:京ICP备08004694号

Website Map:Sitemap