Salt spray box for automotive parts|Automotive Parts Salt Spray Test Chamber

Salt spray box for automotive parts|Automotive Parts Salt Spray Test Chamber

Introduction
The Salt spray box for automotive parts(Automotive Parts Salt Spray Test Chamber) is designed for evaluating the resistance of components or equipment intended to withstand salt-laden atmospheres. During testing, the appropriate severity level is selected based on the component's endurance requirements. The standard test procedure typically includes cycles of humidity, salt spray, and drying.

Phone

400-6400-998
Product Features
Product Parameter
Product Parameter
Model Studio Size  (D*W*H)mm Dimension(D*W*H)mm
LRHS-108-RFHY 450×600×400 Subject to contractual three-view
LRHS-270-RFHY 600×900×500
LRHS-412-RFHY 750×1100×500
LRHS-663-RFHY 850×1300×600
LRHS-816-RFHY 850×1300×600
LRHS-1080-RFHY 900×2000×600
temperature range RT+5℃~60℃
Humidity range 30%~98% RH
Saturated drum temperature RT+10℃~70℃
Temperature uniformity ≤2℃ (at no load)
Temperature fluctuation ±0.5℃ (at no load)
Salt spray deposition 1~2ml/80 cm².h(16-hour average)
heating rate 0.5℃~1.5℃/min
cooling rate 0.5℃~1.0℃/min
Compressed air pressure 2.00±0.01(kg/cm²)
Spraying method Continuous/periodic selectable
Specimen holder angle Can meet 15°, 30° tilt test
Test Methods NSS test AASS test CASS test
Case Material PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums Imported high-grade stainless steel SUS304
Pressurized Air Hose Material High quality rubber hose
Other pipelines Thickened Fluorosilicone Rubber Tubing
Temperature Controller Imported “UEC” brand temperature and humidity meter
Dehumidification and cooling Single or double cascade refrigeration
temperature sensor PT100 platinum resistance temperature measurement body
Compressor Taikang, France
heater Titanium Heating Tube
interrupter Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection Over-temperature, overall equipment under-phase/reverse-phase, test timing, rapid fogging instructions
The end of the test, low water level protection, leakage, short circuit, compressor overpressure overload
Supply Voltage AC380V±10% 50Hz
Power consumption 8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment 5℃~+28℃ ≤85% RH
Note:
1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured
2、Can be customized according to the specific requirements of the user non-standard salt spray box for automotive parts etc
3、This technical information, subject to change without notice
Recommendation
Solution
Semiconductor Solutions
Beijing Asterix can provide the semiconductor industry with test solutions that cover all types of temperature and humidity reliability in the chip sealing and testing process.
MORE
Photovoltaic Energy Storage Solutions
Beijing Ashline can provide testing solutions for PV energy storage industry including PV cells, PV modules, PV inverters, energy storage cells, energy storage PCS, energy storage battery clusters, energy storage cabinets and other related industry products.
MORE
Consumer Electronics Solutions
Beijing Asterix can provide the consumer electronics industry with test solutions for electronic components, assemblies, and finished products, such as mobile phones, tablets, computers, wearable devices and other related industry products.
MORE
New Energy Vehicle Solutions
Covering the temperature and humidity testing of new energy vehicles and three electric systems, the products cover walk-in high and low temperature hot and humid chambers for vehicles, high and low temperature test chambers for battery cells, and explosion-proof chambers for airbags.
MORE

Copyright © Beijing Yashilin Test Equipment Co., LTD 备案号:京ICP备08004694号

Website Map:Sitemap