The high and low temperature test chamber is equipped with an original imported thin-film button-type human-machine interface temperature controller. The overall performance is stable, the operation is simple and easy to install. It has a certain level of technical proficiency and a better cost-performance ratio than foreign counterparts. It is an ideal device for high and low-temperature tests.
When conducting tests, it is essential to control various factors. The temperature range is between -40°C and +150°C, with a temperature fluctuation of ±0.5°C. The temperature rise time from -40°C to +150°C is less than 70 minutes, and the temperature drop time from +20°C to -40°C is less than 60 minutes.
The structure and components of the high and low-temperature test chamber are as follows: The inner box is made of mirror stainless steel, while the outer box is made of stainless steel or steel plate spraying. It uses a combination of hard polyurethane foam and glass wool as insulation material. The controller is an original imported single-point controller. The main refrigeration system employs a foreign imported Tecumseh full-enclosed compressor. It also includes power control and various protective devices.
The high and low-temperature test chamber is developed through the precise combination of these materials and components. Its primary function is to conduct high and low-temperature alternating tests on industrial products, electronic and electrical materials, and products. By simulating various atmospheric environments, it can determine the performance and parameters of the test samples, facilitating a better understanding of the samples.
It should be emphasized that before using the test chamber, it is necessary to clean the dust. Otherwise, the test results may deviate from the actual results.
